IJ4516T Inflatable Jack - 40ton 405mm lift

IJ4516T Inflatable Jack

• Highly flexible and lightweight jacks only require an air supply of 116 psi maximum. Any non-explosive gas or water can also be used for inflation. 
• Uninflated jacks are only 1" thick, making seemingly impossible lifting tasks routine. 
• Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 175 psi. 
• In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 116 psi. 
• Large surface area and material flexibility allow jacks to lift loads on soft or compressible surfaces without support cribbing being necessary. 
• Safety first! The controller, shut-off and air hoses are all equipped with USA industrial interchange style air couplers. Female half coupler bodies have a locking collar, protecting operator from accidentally disconnecting jack while under load. 
• Surface of jack has a non-skid pattern, assuring that the jack won’t “walk away” from the job. Jacks can be used to lift a load from an uneven surface, are tolerant of side-loaded applications. 
• Non-conducting material resists oil, ozone and most chemicals. Cold resistant down to -40° F, heat resistant up to 240° F (short term) or 200° F (long term).
• Field-replaceable nipples are made of tough steel, with internal thread to prevent abrasion damage. Ideal needle aperture of 1/4" allows rapid inflation, without risk of icing, and permits a safe lowering speed. 
• Single jack controller with “dead man” control (350090). Can be used individually, or in multiples to regulate any number of jacks desired. 
• Heavy attachment straps are provided on 4 largest sizes for attachment of a rope or hook to position the jack from a safe distance. 
• Inflation hose system is color-coded (red and yellow) for easy recognition when using more than one jack.