30 Ton Push Puller Set - PPH30

30 Ton Push Puller Set - PPH30

Push-Puller® with RT302 center-hole Power Twin® cylinder, cylinder half coupler, P55 pump, 9767 1.8m hose, 9798 hose half coupler, 457mm legs, 28390 leg ends, 1¼inch-7 x 610mm lg. adjusting screw and adjusting crank. Wt., 46.3kg.

Selection and capacity rating: Each Push-Puller’s specified tonnage capacity is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the capacity. Always select the largest capacity puller and the shortest legs that will fit the job.

Power Twin® cylinder: This unique center-hole cylinder powers each Push-Puller®. Puller screw runs right between the twin spring cylinder. A basic head allows you to change from a tapped hole to a plain hole by merely changing the head insert.

• Can apply a hydraulic pushing or pulling force, depending on how the puller is set up. 
• Each unit includes perfectly matched hydraulic components that can be detached from the Push- Puller® for other tasks requiring dependable Power Team power; assuring maximum return on your investment. 
• Optional leg kits adapt your Push-Puller® to extra long or extra short reach. 
• A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with our Push-Pullers®.