Cetop 3 - NG06 12vdc Solenoid Valve - slow response AD3E.01.C.L.J52

Cetop 3 - NG06 12vdc Solenoid Directional Valve with spool movement speed control.

Valve type AD3.E.01.C.L.J52

These ON-OFF type valves are used a lower spool movement speed than usual for conventional solenoid valves is required to prevent impacts which could adversely affect the smooth running of the system. The system consist of reducing the transfer section for the fluid from one solenoid to the other by means of calibrated orifices.

• This version can only be used with a direct current (DC) and also involves a reduction in the limits of use so that we suggest to always test the valve in your application
• To order AD.3 ... J· version valves, specify the orifices code.
• The operation is linked to a minimum counter-pressure on T line (1 bar min.)
• The switching time referred to the spool travel detected by a LVDT transducer can vary for the NG6 valve from a minimum of 100 to a maximum of 300 ms depending on 5 fundamental variables:

1. Diameter of the calibrated orifices (see pdf table)
2. Hydraulic power for clearance referring to flow and pressure values through valve
3. Spool type
4. Oil viscosity and temperature
5. Counter-pressure at T line

• Possible mountings: C I E I FIG I H
• 16 / 19 / 20 / 21 spools not planned for AD.3.E ... J